The Satellite Desktop Stands; The Center Channel Stands - Cambridge SoundWorks Speaker System Installation And Operating Instructions Manual

The Satellite Desktop Stands

Install a Satellite Desktop Stand
by inserting it into the "T"-shaped
socket in the back of each satellite,
feeding the cable through the
stand's cut-out (see Diagram K) .
Apply the five self adhesive feet
to the base of the Desktop Stands
(see Diagram L). The feet prevent a
K
6
satellite from sliding across the
desktop should it be inadvertently
bumped or jostled.
Note: If you wish to install the
rear Satellites in the Floor Stands,
do not apply the self adhesive feet
to the base of their Desktop Stands.
L

The Center Channel Stands

The stands for the center channel
speaker are installed by inserting
the strut of the stand into the
recess in the back of the Center
Channel speaker (see Diagram L1).
If using the Center Desktop
Stand, apply the provided self-
adhesive feet to it's bottom surface.
The feet prevent a satellite speaker
from sliding across the desktop
should it be inadvertently bumped
or jostled.
Use the provided hook and
loop fasteners to adhere the
Monitor Stand to the top surface
of the monitor (see Diagram L2).
L2
FRONT
LEFT
L1
Apply feet only to
Center Desktop stand