Important Notice The serial number for the PlayWorks PS2000 Digital is located on the Subwoofer and Dipole Unit. Please write this number down and keep it in a secure area. This is...
Page 3
This will prevent damage to the service technician has used replacement product due to lightning and power-line parts specified by Cambridge SoundWorks surges. or have the same characteristics as the OVERLOADING – Do not overload wall original parts.
Thank you for buying PlayWorks PS2000 Digital by Cambridge SoundWorks, a revolutionary two piece Dolby Digital speaker solution for PlayStation 2 Inventory ...1 Speaker System Connections ...2 Signal Source Connections...2 System Connection Diagram...3 Dipole Unit Stand Installation ...4 Speaker Placement ...5 System Functions...7...
Examine each unit carefully for shipping damage. If there is any, do not install or use the system. Contact the retailer where the system was purchased. Save the shipping carton and inserts in case you have to transport the system later. 15V 3A DC Power Adapter Subwoofer Dipole Unit...
Speaker Connections Power Supply Adapter Connections Using the Dual RCA to RCA plug, connect the R (right) and L (left) Confirm the power switch on the Speaker inputs located on the back Subwoofer is in the “OFF” position. panel of the Dipole Unit to the Insert the Power Adapter’s AC plug corresponding Speaker outputs on the into an appropriate receptacle.
Page 8
PlayStation 2 CD Player To the Digital Optical Output ® MiniDisc Player Optical Cable Sound Card Optical Output SPDIF Cable (RCA to RCA) To the Digital Coaxial Output PC-DVD Encore DVD Player Sound Card Optical Output CD Player To wall AC Receptacle Power Adapter Stereo to Dual RCA Cable Dual Female-to-Female...
Dipole Unit Stand Align the Dipole Unit Stand to the Dipole Unit. Using the Ball-fastener provided, attach the Dipole Unit Stand to the Dipole Unit, (see diagram A). Dipole Unit Stand Ball-fastener Tilting the Dipole Unit Loosen the Ball-fastener below the Dipole Unit Stand to adjust the tilt of the Dipole Unit.
For the best listening effect, place the Dipole Unit between 50cm and 1.5m from the listening position and at ear level if possible. Use the Dipole Unit Stand to tilt the Dipole Unit downwards to your listening position when placing the Dipole Unit on your T.V.
Page 11
Rear Panel of Subwoofer Rear Panel of Dipole Unit Remote Control...
MUTE (On Remote Control): Mutes all output from the PS2000 Digital. Press this button once to mute. Press a second time to restore audio output. You can also enable or disable the mute function by pressing volume buttons on the Dipole Unit together.
Page 13
ANALOG (On Remote Control): Selects the analog input source signal from the analog LINE IN input or both the analog LINE IN and REAR IN inputs for FourPointSurround sound. (This function is also available on the Dipole Unit, use the SOURCE button) FourPointSurround sound is auto- selected when the front and rear analog inputs are connected.
Page 14
EFFECT (On Remote Control): Processes Digital program material. Repeated presses of this button step through five different operation modes: PASS THROUGH>PRISM>CRYSTAL>GHOST>DIMENSION. (This function is also available on the Dipole Unit, use the EFFECT/CMSS button) Pass Prism Crystal Through Recommended effects selection for 2-channel source materials: Prism (default): General purpose including classical music.
Other supporting chapters (like a “Director’s Comment” section) may be in stereo or mono. These sections will not light the Dolby Digital indicator even though the sound will be properly reproduced by the PS2000 Digital. Creative Multi Speaker Surround (CMSS) CMSS is a 2-channel to 5.1-channel sound processor similar in some aspects to...
Blaster PCI series). 4. Conventional 2-channel sound cards such as Sound Blaster 16 or the Sound Blaster AWE series can also be used with the PS2000 Digital, but these cards will not provide rear channel output when playing games using ®...
The PlayWorks PS2000 Digital is a highly affordable and extremely compact Dolby Digital 5.1 speaker solution targeted at PlayStation 2 Also, when used with a 4 channel PC sound card, or set-top DVD player, the PS2000 Digital delivers a virtual 5.1...