3.2.9 Alarm 2 Menu
ENTER ALARM 2 MENU:
Press a
Press d
Press a
Press d
ACTIVE SUBMENU:
Press d
Press d
DEADBAND SUBMENU:
Press d
Press d
The Dead Band or neutral zone is the number of degrees or counts
(if Input Type is Process) around the Setpoint which the Process Variable
must pass above or below the Setpoint, before the output changes state.
Figure 3.9 Flow Chart for Alarm 2 Menu
1) Press a , if necessary, until CNFG prompt appears.
2) Display advances to INPT Input Menu.
3) Press a , if necessary, until display advances to ALR2
Alarm 2 Menu.
4) Display advances to to AçTV Active Submenu.
5) Display flashes previous selection. Press b to ABoV Above,
or BELo Below.
6) Display shows STRD stored message momentarily and then
advances to DEAD Deadband.
7) Display shows 020.0 Deadband value that can be changed
by pressing b or c .
8) Display shows STRD stored message momentarily and then
advances to ID ID Code Menu.
29