Parking Brake; Blowout Baffles - Toro 74170 Operator's Manual

Operation

Parking Brake

Always set the parking brake when you stop the
machine or leave it unattended.
IMPORTANT: Do not park on slopes unless
wheels are chocked or blocked.
Setting the Parking Brake
1. Move the motion control levers (Fig. 1) out to
the neutral lock position.
2. Pull back and up on the parking brake lever to
set the parking brake (Fig. 2). The parking brake
lever should stay firmly in the "ENGAGED"
position.
24
Releasing the Parking Brake
1. Push forward and down on the parking brake
lever to release the parking brake (Fig. 2). The
parking brake is "DISENGAGED".
1
2
Figure 2
1. Parking brake-ON

Blowout Baffles

Blowout baffles are used when in side discharge
mode only.
IMPORTANT: Do not use blowout baffles
while in recycling mode.
1. To install or remove blowout baffles, install or
remove bolts as shown in figure 3.
2
3
1
Figure 3
1. Bolts
2. Front of Deck
m–4121
2. Parking brake-OFF
3. Baffles