Portion Size - Miele CM6150 Operating Instructions Manual

Portion size

The flavour of the coffee produced
depends not just on the type of coffee
used, but also on the amount of water
used.
You can programme the amount of
water to suit the size of your cups and
the type of coffee you are using.
For coffee drinks that use milk, in
addition to the amount of coffee or
espresso, you can also set the amount
of milk or milk froth to be dispensed.
You can also set the portion sizes for
hot milk and milk froth separately.
Each type of drink has a maximum
portion size that can be programmed.
Preparation is stopped once this has
been reached. The maximum possible
portion size for this type of drink is then
saved in the machine.
If the water container becomes empty
whilst making a drink, the machine will
stop programming the portion size.
The portion size will not be saved.
There are two ways to start
programming the portion amount:
– Either by touching the drink sensor
when you are making a coffee, or
– By selecting Portion size
Parameters  menu.
The changed portion size is always
saved in the current profile. The name
of the current profile appears in the top
left of the display.
Cancelling quantity programming
 Touch the drinks sensor again or the
 sensor for drinks from
programmes again.
38
Changing the portion size
while making a drink
You can change and save the portion
size for Espresso , Coffee ,
Cappuccino  and Latte macchiato 
while making these drinks.
 Place a cup under the central spout.
 Touch the sensor for the drink you
The desired drink will be made and
will appear in the display.
 When the cup is filled up to the level
If you want to change the portion size
for coffee specialities made with milk
(e.g. Cappuccino), the ingredients
(components) which make up the drink
will be saved one after the other while
the drink is being made.
 When the quantity for each ingredient
The programmed mix of ingredients and
portion sizes will now be dispensed
every time that particular drink is
selected.
in the
Further
want until Change
display.
you want, touch OK.
reaches the level you want, touch OK.
appears in the
Save