Call Alert Selection; Silent Operation; Noaa Weather Radio/Scan - Midland X-Talker T290 Series Manual

Model T290 Series

CALL ALERT SELECTION

Your radio has 5 selectable CALL ALERTS (10 for T295). To select,
press the MENU button until a "CA" icon appears and to the right of
the "CA" icon the current CALL ALERT setting is displayed. Then
s\t
press the
radio will emit a corresponding tone for each selection. To confirm,
press the PTT button or press the MENU button to move to the next
feature setting.

SILENT OPERATION

Your radio has a SILENT OPERATION mode. In this mode, all
"beeps" and "tones" are disabled.
To set the SILENT OPERATION, press the MENU button until the
display shows a "bP" icon. Select "on" or "oF" by pressing the
buttons and push the PTT key or MENU button.
VIBRATE ALERT (MODEL T295 only)
To set the VIBRATE ALERT, press the MENU button until the display
shows the icon. Select "on" or "oF" by pressing the
and push the PTT button, or press the MENU button. The
remain on the display if set to "on".

NOAA WEATHER RADIO/SCAN

Your radio has a NOAA WEATHER RADIO function to enable the
user to receive weather reports from designated NOAA stations.
Your radio also has a NOAA WEATHER SCAN function to enable the
user to scan all 10 channels of the NOAA WEATHER RADIO. To turn
the NOAA WEATHER SCAN on, press and hold the WX/
5 seconds while in GMRS mode. The radio will go to WX Band mode
and start scanning all 10 channels and stop on any active channel.
When the channel becomes inactive for 10 seconds the radio will
resume scanning.
To stop the NOAA WEATHER (WX) SCAN and set the channel
manually on the WX Band, press the MENU button during NOAA
WEATHER (WX) SCAN. The radio will stop scanning and the display
will show the current WX Band channel setting. While on WX Band
mode press the
WEATHER (WX) BAND channels.
Page 11
buttons to make the CALL ALERT selections, and the
s\t
buttons to select one of the 10 NOAA
s\t
s\t
buttons
icon will
s
button for
midlandusa.com