Changing The Paper Settings - Canon MB5000 series Online Manual

Hide thumbs Also See for MB5000 series:

Table of Contents

Changing the Paper Settings

This machine prints received faxes to paper loaded in the machine beforehand. You can use the operation

panel to change the paper settings for printing faxes. Make sure that the settings are appropriate for the

loaded paper.

• If the size of loaded paper is different from that specified in the paper size setting, the received faxes

are stored in the machine's memory and Check the page size and tap [OK]. is displayed on the touch

screen. In this case, load the same size of paper as that specified in the paper size setting, then tap

You can also press the Stop button to close the message and print the stored documents in the

machine's memory later.

Printing a Document in Machine's Memory

• If no paper is loaded, or paper has run out while printing is in progress, the received faxes are stored in

the machine's memory and the error message for no paper is displayed on the touch screen. In this

case, load paper and tap OK.

You can also press the Stop button to close the message and print the stored documents in the

machine's memory later.

Printing a Document in Machine's Memory

• If the sender sends a document that is larger than Letter-size or Legal-size, such as 11 x 17 inches, the

sender's machine may send the fax automatically reduced in size or divided, or send only a part of the

Make sure that the machine is turned on.

2. Flick the HOME screen, then tap

Using the Operation Panel

The Fax standby screen is displayed.

3. Tap Function list.

The Function list screen is displayed.

4. Tap FAX paper settings.

The FAX paper settings screen is displayed.

5. Specify the settings.