Oregon Scientific RM928N User Manual page 4

SAFETY AND CARE INSTRUCTIONS
SAFETY
Please observe the following safety precautions when setting
up and using this product.
• LCD panel – The LCD panel is made of glass, and may break
if the unit is dropped or impacted.
• Heat sources – Keep the product away from heat sources
such as radiators, stoves, heaters, and other heat-generating
products.
• Water and moisture – Do not use the product in or near water
or in high moisture areas such as a bathroom.
CARE
To ensure you receive the maximum benefit from using this
product, please observe the following guidelines.
• Cleaning – Use a damp cloth. Do not use liquid cleaning
agents, benzene, thinner, or aerosols.
• Ventilation – The vents and other openings are designed for
ventilation, and should not be blocked or covered. Blocking
the vents can cause the product to overheat, and can damage
the unit.
• Repair – Do not attempt to repair the product or modify the
circuitry by yourself. Voltages are contained inside the unit.
Contact the retailer or a qualified repairman if the product
requires servicing. Only use replacement parts that are
recommended by the manufacturer.
• Do not scratch hard objects against the LCD display as
this may cause damage.
GETTING STARTED
UNPACKING THE PRODUCT
When you unpack your clock, make sure to keep all the packing
materials in a safe place, in case you need to later transport or
return it for servicing. In the box, you will find:
Main unit Battery
BATTERIES
To load the battery:
4
User manual Pouch
manual
Instructions
1. Locate the battery
compartment.
2. Install the battery. Observe
the polarities.
Warning:
Incorrect installation may
damage the product.