Pairing Your Device - iHome iBT34 Go+ Arc Instruction Manual

Pairing Your Device

Pairing is the set-up process to introduce your Bluetooth-capable device to the Go+ Arc. Once your device is
paired, the Go+ Arc can recognize it and you can play your audio through it.
1. Make sure your Bluetooth device is fully charged. Turn on your Bluetooth device and
2. Press the
3. Press and hold the
4. "iHome Go+ Arc" should appear in your device's Bluetooth menu. If "Not Paired", "Not Connected" or
similar message appears, select "iHome Go+ Arc" to connect it. If prompted for a passcode, enter
"1234" on your device's keypad.
iHome Go+ Arc
For iPhone
5. If pairing is successful, 1 beep will sound and the Bluetooth status indicator light will appear solid blue,
indicating the Go+ Arc is ready to play music. There should also be an indication on your device. If no
device is successfully paired within 3 minutes the Go+ Arc will default to previous mode. Once the Go+
Arc is paired to a device, it will attempt to autolink when the device is within range (about 30 feet).
make it "discoverable" by turning on Bluetooth mode (check in Options or Settings).
Power Button to turn on the Go+ Arc. The first time the unit is
powered on, it will enter auto-pairing mode and attempt to connect to a Bluetooth
device (if so, skip to step 4). Otherwise, follow step 3 to begin pairing.
beep and the Bluetooth status indicator light on front of the unit will flash quickly.
iHome Go+ Arc
Play/Pause/Pairing Button for 2 seconds. The Go+ Arc will
For other
6
Go+ Arc
Using the
iHome Go+ Arc
iHome Go+ Arc