Samsung SNF-7010 User Manual page 31

3. In the <Address> pane, provide the
necessary information.
• MAC (Ethernet) Address : The MAC
address imprinted on the camera
label is automatically displayed and
requires no user setting.

M
IP related parameters can be set only
when DHCP is not checked.
If not using a Broadband Router
For setting <IP Address>, <Subnet Mask>, and <Gateway>, contact your network
administrator.
4. In the <Port> pane, provide necessary
information.
• HTTP Port : Used to access the
camera using the Internet browser,
defaulted to 80.
• VNP Port : Used to control the video
signal transfer, defaulted to 4520.
5. Enter the password.
Enter the password of "admin" account, which was used to access the camera.
The default password is "4321".

J
The default password is vulnerable to security threats. You should change it.

If you want to change the password, refer to "Administrator password change" of the user
setup. (page 91)
6. Click [OK].
Manual network setup will be completed.
English _31