Samsung SNF-7010 User Manual page 23

Powering and networking (SNF-7010VM)
Connect a camera to a PoE equipment.

J
A connection method may vary depending on the installation environment of a user.

Connect to a PoE (Power over Ethernet) enabled router's PoE connector.

Use PoE (Power over Ethernet) that is compliant with the IEEE802.3af protocols.
You can only use a Mode A PoE device that supplies power through data pin pair 1, 2, 3, 6.
Power Cable Specification for Each Model
In case of DC 12V Input:
Wire Type (AWG)
Cable Length (Max.)
Network Cable Specification
Item
Connector
Ethernet
Cable
Max Distance
PoE Support
#22
24m
Contents
RJ45
10/100Base-T
UTP Category 5e
100M
IEEE 802.3af
#20 #18
38m 60m
Remark
10/100 Mbps
English _23