Regular Maintenance - Toshiba e-STUDIO 2020c Quick Start Manual

Chapter 5 MAINTENANCE & SPECIFICATIONS

Regular Maintenance

The cleaning method for the equipment is as follows.
We recommend you to clean the following items weekly, so that the originals can be scanned in unsoiled conditions.
Be careful not to scratch the parts that you are cleaning.
Notes
• Be careful not to scratch the portions in cleaning.
• When cleaning the surface of the equipment, do not use such organic solvents as thinner or benzine.
- This could warp the shape of the surface or leave it discolored.
- When using a chemical cleaning pad to clean it, follow the instruction.
1
1.
Scanning area (surface of the long rectangular glass)
Wipe it with a soft dry cloth. If there are still stains remaining, wipe clean with a piece of soft cloth which has been moistened
with water and then squeezed well.
Do not use liquids other than water (such as alcohol, organic solvents or neutral detergent).
2.
Original glass
Wipe it with a soft dry cloth. If there are still stains remaining, wipe clean with a piece of soft cloth which has been moistened
with water and then squeezed well.
Do not use liquids other than water (such as alcohol, organic solvents or neutral detergent).
3.
Guide
Clean the surface as follows depending on the staining.
• Clean it with a soft cloth.
• Clean it with a soft cloth lightly moistened with water.
• Clean it with a soft cloth lightly moistened with alcohol, and then wipe it with a dry cloth.
• Clean it with a soft cloth lightly moistened with watered-down neutral detergent, and then wipe it with a dry cloth.
4.
Platen sheet
Clean the surface as follows depending on the staining.
• Clean it with a soft cloth.
• Clean it with a soft cloth lightly moistened with water.
• Clean it with a soft cloth lightly moistened with alcohol, and then wipe it with a dry cloth.
• Clean it with a soft cloth lightly moistened with watered-down neutral detergent, and then wipe it with a dry cloth.
6
2
3
4