Rwr, Rww Resister; Monitor Code - Toshiba TOSVERT VF-AS1 Instruction Manual

6.2. RWr, RWw resister

RWr . RWw (Default value = 0)
Inverter → PLC (RWr)
Address
RWr n First monitor value
RWr n+1 Second monitor value (output frequency)
RWr n+2 Reply code
RWr n+3 Read data
"n" is depend on the station number.

6.3. Monitor code

Divide the monitor code (RWw n) into half and select the first monitor data (RWr n) from
the lower 8 bits and the second monitor data (RWr n) from the higher 8 bits.
(Example) When output voltage is selected for the first monitor and output torque is
selected for the second monitor.
The hexadecimal value attaches and expresses "H" to the end of a number.
*
Monitor code (When an invalid monitor code is set up, monitor value fixes to 0.)
Second Monitor Description
Code Number
00H Output frequency
01H Output frequency
02H *1 Output current
03H Output voltage
04H None monitor (Monitor value is 0)
05H Frequency command value
06H Output speed *2
07H Output torque
08H DC voltage
09H PBR load factor(FD28)
0AH Motor overload factor (OL2 data)
0BH, 0CH None monitor (Monitor value is 0)
0DH Input power
0EH Output power
0FH Input terminal information
10H Output terminal information
11H Output current (% monitor)
12H Exciting current
13H None monitor (Monitor value is 0)
14H Cumulative operation time
15H, 16H None monitor (Monitor value is 0)
17H Accumulation power supply ON time
18H Motor overload factor
19H Integral input power
1AH Integral output power
1BH RR/S4 input
1CH VI/II input
1DH RX input
1EH, 1FH None monitor (Monitor value is 0)
20H Torque command
21H Torque current
22H None monitor (Monitor value is 0)
23H Speed feedback (real-time value) *3
24H PID feedback value
25H Speed feedback (1-second filter) *3
26H to 2FH None monitor (Monitor value is 0)
Contents
RWw n
the higher 8 bits
Second monitor description
(the higher 8 bits)
PLC → Inverter (RWw)
Address
RWw n Monitor code (first and second)
RWw n+1 Set frequency/ torque
RWw n+2 Instruction code
RWw n+3 Write data
The monitor code is 0703H.
->
Monitor code
the lower 8 bits
First monitor description
First Monitor Description
(the lower 8 bits)
None monitor (Monitor value is 0)
Output frequency
Output current
Output voltage
None monitor (Monitor value is 0)
Frequency command value
Output speed *2
Output torque
DC voltage
PBR load factor(FD28)
Motor overload factor (OL2 data)
None monitor (Monitor value is 0)
Input power
Output power
Input terminal information
Output terminal information
Output current (% monitor)
Exciting current
None monitor (Monitor value is 0)
Cumulative operation time
None monitor (Monitor value is 0)
Accumulation power supply ON time
Motor overload factor
Integral input power
Integral output power
RR/S4 input
VI/II input
RX input
None monitor (Monitor value is 0)
Torque command
Torque current
None monitor (Monitor value is 0)
Speed feedback (real-time value) *3
PID feedback value
Speed feedback (1-second filter) *3
None monitor (Monitor value is 0)
－ １７ －
E6581476②
Contents
Unit
0.01Hz
0.01Hz
0.01A
0.1V
－
0.01Hz
-1
1min
0.1%
0.1V
0.1%
0.1%
－
0.01kW
0.01kW
－
－
0.1%
0.01A
－
1hr
－
1hr
0.1%
1kWh
1kWh
－
－
－
－
0.1%
0.1%
－
0.01H
0.01Hz
0.01H
－