Table of Contents
Advertisement
4. Place the telephone cord into the right molded
4. Place the telephone cord into the right molded
channel cord holder and plug the other end of
channel cord holder and plug the other end of
the cord into the wall jack. (Remember, the
the cord into the wall jack. (Remember, the
phone must be fully charged before you can
phone must be fully charged before you can
use it.)
use it.)
5. Place the base on the two posts of the wall plate
5. Place the base on the two posts of the wall plate
and slide downward to secure.
and slide downward to secure.
6. Plug the AC adapter into a standard 120 V AC
6. Plug the AC adapter into a standard 120 V AC
wall outlet that is not controlled by a wall switch.
wall outlet that is not controlled by a wall switch.
Use only the AC adapter that came
with the phone.
7. Raise the antenna on the base.
7. Raise the antenna on the base.
MMounting Directly on a Wall
MMounting Directly on a Wall
If you do not have a standard wall plate, you can
If you do not have a standard wall plate, you can
mount the phone directly on a wall. Before
mount the phone directly on a wall. Before
mounting your cordless telephone, consider
mounting your cordless telephone, consider
the following:
the following:
•
•
Select a location away from electrical cables,
Select a location away from electrical cables,
pipes, or other items behind the mounting
pipes, or other items behind the mounting
location that could cause a hazard when
location that could cause a hazard when
inserting screws into the wall.
inserting screws into the wall.
•
•
Make sure the wall material is capable of
Make sure the wall material is capable of
supporting the weight of the base and
supporting the weight of the base and
handset; otherwise, damage to the unit
handset; otherwise, damage to the unit
could result.
could result.
•
•
Use #10 screws (minimum length of 1-3/8
Use #10 screws (minimum length of 1-3/8
inches) with anchoring devices suitable for
inches) with anchoring devices suitable for
the wall material where the base will
the wall material where the base will
be placed.
be placed.
1. Insert the screws, with
1. Insert the screws, with
their appropriate anchoring
their appropriate anchoring
devices, 3-15/16 inches apart.
devices, 3-15/16 inches apart.
Allow 3/16 of an inch
Allow 3/16 of an inch
between the wall and screw
between the wall and screw
heads for mounting the phone.
heads for mounting the phone.
2. Plug the AC adapter into the base.
2. Plug the AC adapter into the base.
3. Place the AC adapter cord inside the left molded
3. Place the AC adapter cord inside the left molded
channel cord holder.
channel cord holder.
4. Plug one end of the long telephone cord into the
4. Plug one end of the long telephone cord into the
TEL LINE jack on the base.
TEL LINE jack on the base.
5. Place the telephone cord into the right molded
5. Place the telephone cord into the right molded
channel cord holder.
channel cord holder.
6. Place the base on the screws and push down
6. Place the base on the screws and push down
until it's firmly seated.
until it's firmly seated.
7. Plug the other end of the telephone line into the
7. Plug the other end of the telephone line into the
telephone wall jack. (Remember, the phone
telephone wall jack. (Remember, the phone
must be fully charged before you can use it.)
must be fully charged before you can use it.)
8. Plug the AC adapter into a standard 120 V AC
8. Plug the AC adapter into a standard 120 V AC
wall outlet that is not controlled by a wall switch.
wall outlet that is not controlled by a wall switch.
Use only the AC adapter that
came with the phone.
9. Raise the antenna on the base.
9. Raise the antenna on the base.
7
Advertisement
Table of Contents
