Panasonic CS-S9NKV Service Manual page 111

15.2.1.3 To remove power electronic controller
9. Pull out the main
8.
7.
6.
5.
Figure 14
2 Hooks (left hand side)
Figure 13
10. Detach 6 connectors as labeled from
electronic controller
controller halfway.
Remove screw to
remove terminal board
complete.
Detach the HV+ (White) &
HV- (Black) terminal
wires, CN1 and GND then
remove the high voltage
generator.
Detach the CN-DISP
connector then remove
the indicator complete.
11. Detach AC303 (WHT), RY-PWR connector
Detach the Earth wire
12. Detach AC304 (RED) from Terminal Board.
111
4. Remove the control
board cover by
releasing the 2 hooks.
the electronic controller. Then pull out
main controller gently
(Black and Brown) from the electronic controller.
Figure 15
AC303 (WHT)
RY-PWR
CN-FM
AC304 (RED)
CN-STM2
CN-STM1
CN-MSENS
CN-TH
CN-CLN