Number Of Rings; Remote Access Code - VTech LS6185 User Manual

Answering system settings

Number of rings

You can choose two, three, four, five or six rings; or toll saver. With toll saver
selected, the answering system answers after two rings if you have new messages,
or after four rings when there are no new messages. This enables you to check for
new messages and avoid paying long distance charges when calling from out of
your local area.
1. Press MENU when the phone is not in use.
to scroll to Answering sys, then
2. Press or
press SELECT.
to scroll to Ans sys setup, then
3. Press or
press SELECT.
to scroll to # of rings, then press SELECT.
4. Press or
to choose 6, 5, 4, 3, 2 or Toll saver.
5. Press or
6. Press SELECT to save and you hear a confirmation tone.
If you subscribe to voicemail service from your telephone service provider, see
Answering system and voicemail on page 43.

Remote access code

A two-digit security code is required to access the answering system remotely
from any touch-tone telephone. The preset code is 19. You can set the code from
00 to 99.
1. Press MENU when the phone is not in use.
to scroll to Answering sys, then
2. Press or
press SELECT.
to scroll to Ans sys setup, then
3. Press or
press SELECT.
to scroll to Remote code, then press SELECT.
4. Press or
5. Use the dialing keys to enter a two-digit number.
-OR-
Press or to scroll to a desired two-digit number.
6. Press SELECT to save and you hear a confirmation tone.
41
# of rings
ECO
ANS ON
3
ECO
ANS ON
Remote code
ECO
ANS ON
Remote code
19
ECO
ANS ON