SOYO SY-7IWB V1.0 User Manual page 32

Hardware Installation SY-7IWB V1.0
5. IDE LED
Attach the 2-pin IDE device LED cable to the corresponding IDE LED
header on the Motherboard. This will cause the LED to lighten when an
IDE (HDD, CD-ROM) device is active.
HDD LED Pin Assignment
+ _
LED Anode LED Cathode
6. ATX Power On/Off Switch
Attach the 2-pin momentary type switch to the PWRBT header for turning
On or Off your ATX power supply.
PWRBT Pin Assignment
1
Power On/Off GND
28