Set Up A Wireless Access List - NETGEAR JNR1010v2 User Manual

Set up a Wireless Access List

You can set up a list of computers and wireless devices that are allowed to use WiFi to
connect to the router. You must enter the MAC address of each computer or device. When
you enable access control, computers and devices that are not in the list cannot connect with
WiFi.
To set up a wireless access list and turn on access control:

1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Advanced Setup > Wireless Settings.
5. Click the Set Up Access List button.
6. Click the Add button.
N150 and N300 Wireless Routers
Networking
40