Changing the Mode
❑
Provides the function to turn on the D Effect. You can choose between Mode1 and
Mode. To achieve the 3D effect, the 3D glasses shutter back and forth from the left to
right and vice versa (left/right sync).
•
Off : Turns the 3D Effect function off.
•
Mode1 : Mode 1 operates with right sync first.
•
Mode : Mode 2 operates with left sync first.
•
D Conversion : Provides picture converted 3D to 2D. You can choose this to watch
2D picture temporally when you feel dizzy, but you should
choose Off to end 3D Effect completely.
You should choose Off to end 3D Effect completely.
N
If the 3D effect is not working properly, it means the Mode and 3D glasses may
N
not be syncing properly. To put them in sync, switch to the other mode.
Changing the Format
❑
Select the optimal input format to match your graphic cards or 3D Software.
•
Checker Board : If the output format of your graphic card or 3D software is
Checkerboard, select this input format.
•
Horizontal : If the output format of your graphic card or 3D software is Horizontal
interleaved, select this input format.
•
Vertical : If the output format of your graphic card or 3D software is Vertical
interleaved, select this input format.
Reset → OK / Cancel
❑
Resets all picture settings to the default values.
Select a picture mode to be reset. The reset is performed for each picture mode.
N
Setting up the TV with your PC
Preset: Press the SOURCE button to select PC mode.
N
Auto Adjustment
❑
Auto Adjustment allows the PC screen of set to self-adjust to the incoming PC video
signal. The values of fine, coarse and position are adjusted automatically.
This function does not work in DVI-HDMI mode.
N
Press the TOOLS button to display TOOLS menu.
T
You can also set the adjustment by selecting TOOLS → Auto Adjustment.
Screen
❑
The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone,
then adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, readjust the picture
so that it is aligned on the center of screen.
Coarse
Adjusts the frequency when vertical noise appears on the screen.
Fine
Adjusts the screen to be clearer.
PC Position
Adjust the PC's screen positioning if it does not fit the TV screen. Press the ▲ or ▼ button to adjusting the Vertical-Position. Press
the ◄ or ► button to adjust the Horizontal-Position.
Image Reset
You can replace all image settings with the factory default values.
BN68-01937A-Eng.indb 17
Press the ▲ or ▼ button to adjusting the Vertical-Position. Press
English - 1
T V
Picture Options
Colour Tone
: Normal
Size
: 16:9
Digital NR
: Off
Real 100Hz Demo
HDMI Black Level
: Normal
Film Mode
: Off
Screen Burn Protection
3D Effect
Move
Enter
Return
T V
D Effect
Mode
: Off
Format
: Checker Board
Move
Enter
Return
T V
Picture
Mode
: Standard
Cell Light
Contrast
Brightness
Sharpness
Colour
Tint (G/R)
G 50
R 50
Advanced Settings
Picture Options
Reset
: OK
Move
Enter
Return
T V
Picture
Mode
: Standard
Cell Light
Contrast
Brightness
Sharpness
Auto Adjustment
Screen
Advanced Settings
Picture Options
Reset
: OK
Move
Enter
Return
2009-03-17 오전 11:24:45
8
95
45
50
50
8
95
45
50