INNOSTREAM INNO-A20 User Manual page 90

INNO-A20 User's Guide
You can transfer data or fax to other devices via a data cable that is connected to PC. The data
cable is used to connect your phone to the PC' s serial USB port.
To send and receive E-mail and faxes, connect to computer and access the Internet, you need
the appropriate data/fax communication software installed on your computer.
Also, you have to subscribe the data service when you subscribe a network service provider.
This service varies depending on the network, so contact service provider before you start
using the service.
Modem configuration setting on the PC
Your phone has an integral modem. You need to install a standard modem in your PC' s
operating system.
- Standard modem with 19200 bit/s (115200 initialisation speed)
- Fax Class 1 modem, max 9600 bit/s
For using fax service, you need to check the fax application program on the PC as below.
- Modem initialisation: AT+IFC=1,1
- Flow Control : Software Flow Control
- 115200 initialization speed and Fax Class 1 modem
How to use the data service.
1. Connect the data cable between the PC' s USB serial port and your phone' s external
socket.
2. Execute a dial-up Modem software on the PC.
You need to set the Modem configuration on the PC before you use.
3. Execute appropriate data/fax program such as Internet browser on the PC.
! Note : Some data service provider releases a integrated data/fax software including the dial-up
modem software.
[그림수정]
Charging during the data service
Your phone is automatically charged by USB cable whilst you are enjoying the data/fax world.
PAGE : 90 of 98
INNOSTREAM Confidential