Troubleshooting; Before Performing Service; Qc Test Mode; How To Check The Water Level Frequency - LG WM2411HW Service Manual

7. TROUBLESHOOTING

7-1. BEFORE PERFORMING SERVICE

Be careful of electric shock when disconnecting parts for while troubleshooting.
The voltage of each terminal is 120V AC and DC when the unit is plugged in.

7-2. QC TEST MODE.

The washer must be empty and the controls must be in the off state.
Á
Press the SPIN SPEED and SOIL LEVEL buttons simultaneously.
¤ ¤
¤ ¤ Ł Ł Press the Power button, while the above condition. Then buzzer sound twice.
¤ ¤ Ø Ø In order to advance to the next step of test mode, press the START / PAUSE button once.
Number of times the
Start/Pause button is pressed
None
1 time
2 times
3 times
4 times
5 times
6 times
7 times
8 times
9 times
10 times
11 times
12 times
13 times
WM2411HW
WM2432HW
WD-12210(5)BD

7-3. HOW TO CHECK THE WATER LEVEL FREQUENCY

Press the SPIN SPEED and SOIL LEVEL button simultaneously.
So, for example a display indicating 241 : a Water level frequency of 241 x.1 kHz
Check Point
Turns on all lamps and locks the door.
Tumble clockwise.
Low speed Spin.
High speed Spin.
Inlet valve for prewash turns on.
Inlet valve for main wash turns on.
Inlet valve for hot water turns on.
Inlet valve for softener turns on.
Inlet valve for bleach turns on.
Tumble counterclockwise.
Heater turns on for 3 sec.
Circulation pump turns on.
Drain pump turns on.
Power off and unlock the door.
The digits indicate the water level frequency ( x.1 kHz ).
WM2011HS / WM2011HW
WM2032HS / WM2032HW
WM0532HW / WD-10210BD
= 24.1 kHz
19
Display Status
rpm (40~50)
rpm
rpm
Water level frequency (25~65)
Water level frequency (25~65)
Water level frequency (25~65)
Water level frequency (25~65)
Water level frequency (25~65)
rpm (40~50)
Water temperature
Water level frequency (25~65)
Water level frequency (25~65)
Turn off all lamps.
WM1811CW
WM1832CW