Weslo Cadence G 5.9 WLTL29609.10 User Manual page 8

4. Attach the console assembly to the Upright (73)
and the Handrails (69) with five M4.2 x 19mm
Screws (3). Be careful not to pinch the wires.
5. Attach the Latch Housing (72) to the left Upright
(73) with two #10 x 1" Tek Screws (7); start
both Screws, and then tighten them.
6. Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex keys
in a secure place. One of the hex keys is used to adjust the walking belt (see page 17). To protect the floor or
carpet, place a mat under the treadmill.
4
Console Assembly
73
69
3
5
72
7
8
3 3
73
69