Projector Identification System For Multiple Projector Control; Setting The Projector Id - Epson H654A User Manual

Note: Do not pass drop-prevention cables through the security cable attachment point when mounting
the projector on a wall or ceiling.
Parent topic:
Related references
Projector Parts - Front/Top
Optional Equipment and Replacement Parts

Projector Identification System for Multiple Projector Control

You can operate multiple projectors using one remote control for more elaborate presentations. To do
this, you assign an identification number to each projector and to the remote control. Then you can
operate all the projectors at once or individually.
You can also match the colors displayed by any projectors you plan to use near each other.
Caution: Leave at least 2 feet (60 cm) of space between the projectors to prevent them from
overheating.

Setting the Projector ID

Setting the Remote Control ID
Matching Multiple-Projector Display Quality
Parent topic:
Setting the Projector ID
If you want to control multiple projectors from a remote control, give each projector a unique ID.
1. Press the Menu button.
2. Select the Extended menu and press Enter.
Projector Security Features
Adjusting Projector Features
101