Advertisement
LP CYLINDER IS SOLD SEPARATELY. Fill and leak check the cylinder before attaching to grill and regulator (see Use &
17
Care section). Once cylinder has been filled and leak checked, place cylinder into hole in bottom shelf. Make sure cylinder
valve is facing front of grill. Secure cylinder with cylinder screw under bottom shelf. Insert regulator through large hole in
See Use & Care section of this manual to perform the "Burner Flame Check" and for
left side panel.
important safety instructions before using.
CAUTION
Cylinder valve must face to front of cart once
tank is attached. Failure to install cylinder
correctly may allow gas hose to be damaged
in operation, resulting in the risk of fire.
Cylinder screw at rear of cart
Always keep LP cylinders in upright position during use,
transport, and storage.
On back of grill, slide grease tray into opening in upper back
18
panel.
19
Unscrew electronic ignition button on front of control panel.
Insert AA battery into ignitor, negative (—) end first. Replace
button.
-
+
22 • 463270708
Regulator
Grease tray
Electronic Ignition Button
LP Cylinder
(not included)
Tank valve
facing front
CAUTION
Failure to install grease tray will
cause hot grease to drip from bottom
of grill with risk of fire or property
damage.
Advertisement
