Char-Broil 463270708 Product Manual page 20

Insert end of tank wire (without hole) into back of lower back
13
panel. Attach tank wire and center front shield extension tab
together under front brace with a #8x5/8" self-tapping screw.
A
#8x5/8" self-
tapping screw
Insert hinge pin on bottom of doors into hole in bottom shelf.
14
Press upper hinge pin in front brace, align hinge hole on top of
door, and release hinge pin into door.
NOTE: Once doors are installed adjust Door Brace up or
down to adjust for proper door clearance, then tighten
screws to Door Brace from step 5.
20 • 463270708
Left door
Tank Wire
Right door
B
PRESS
Top of
door
Hinge pin
on bottom
of door