Advertisement
Under sideburner shelf, attach sideburner ignitor wire to electrode (A)
11
Place burner cap onto sideburner
aligning grate legs with holes in shelf.
A
Sideburner Ignitor Wire
C
Sideburner
cap clip
First, attach tank heat shield and shield extension together with two #8-32x3/8" screws, 4mm flat washers, 4mm lock
12
washers and #8-32 hex nuts. Inside of cart, insert rear shield tabs into two left slots between upper and lower back panels.
Attach left front shield tab under front brace with #8x3/8" self-tapping screw. Insert left and right grease tray rails into slots
beneath grease tray opening in upper back panel. Attach left rail to brace, with a #8x3/8" self-tapping screw. Attach right rail
and right front shield extension tab together under front brace with a #8x3/8" self-tapping screw.
#8-32x3/8"
Screw
Tank heat shield
Some components not shown for
illustration purposes.
(B)
. Attach sideburner cap clip (C). Place sideburner cooking grate onto sideburner shelf,
Sideburner cooking grate
Sideburner
cap clip
Burner cap
Tank heat shield extension
4mm Flat washer
4mm Lock washer
#8-32 Hex nut
B
#8x3/8" self-
Left grease
tapping screw
tray rail
Right grease
tray rail
463260108 • 19
Advertisement
