Related Manuals for Synology RackStation RS3413xs+
Summary of Contents for Synology RackStation RS3413xs+
- Page 1 Synology RackStation RS3413xs+ Quick Installation Guide Synology_QIG_RS3413xs+_20121224...
-
Page 2: Table Of Contents
Table of Contents Chapter 1: Before You Start Package Contents ............................... 3 Synology RackStation at a Glance ........................4 Safety Instructions ............................... 6 Chapter 2: Hardware Setup Tools and Parts for Hard Disk Installation ......................7 Install Hard Disks and SSD ..........................7 Add a RAM Module to RackStation ........................ -
Page 3: Package Contents
C h a p t e r Before You Start Chapter 1: Before you start setting up your RackStation, please check the package contents to verify that you have received the items below. Please also read the safety instructions carefully before use to prevent your RackStation from any damage. -
Page 4: Synology Rackstation At A Glance
LCM panel and access SSD trays.) Hard Drive Trays Front Panel Install hard disks here for usage with your Synology RackStation. Use these buttons to navigate info menus on the LCM display. For more Escape/Up/Down/Enter Front Panel information, see “LCM Display”... - Page 5 1. Press and hold to restore IP, DNS, passwords for the admin account RESET Button Back Panel to default value. 2. Press and hold to reinstall software on your Synology RackStation. --------- For more information about Synology Expansion Unit supported by your RackStation, visit www.synology.com. 5 Chapter 1: Before You Start...
-
Page 6: Safety Instructions
Keep Synology product in a correct, secure position. Do not place the Synology product close to any liquid. Before cleaning, unplug the power cord first. Wipe Synology product with damp paper towels. Do not use chemical or aerosol cleaners to clean it. -
Page 7: Chapter 2: Hardware Setup
Install Hard Disks and SSD Before using your Synology RackStation to store or share data, please install at least one hard disk. In addition, RackStation offers the option to install SSD (Solid State Drives) in order to boost cache read performance. This section will guide you through the process of installing hard disks and SSD on your Synology RackStation. - Page 8 2.5” Hard Disk: Place the hard disk in the hard drive tray. Turn the tray upside down and tighten screws into the four spots indicated below to secure the hard disk. 3 After securing the hard disk and tray, insert both into the empty hard drive bay. Important: Make sure the hard drive tray is completely inserted.
-
Page 9: Add A Ram Module To Rackstation
Add a RAM Module to RackStation Synology offers RAM modules (4GB/8GB) which allow you to expand the memory capacity of your RackStation. To install, check, or remove your RAM module, please follow the steps below. - Page 10 1 Start up your RackStation. (See “Start Up Your RackStation” on Page 15 for more information.) 2 Install DSM. (See “Chapter 3: Install DSM on RackStation ” on Page 17 for more information.) 3 Log in to Synology DiskStation Manager (DSM). 10 Chapter 2: Hardware Setup...
-
Page 11: Add A Network Interface Card To Rackstation
Before installing the card on your RackStation, you must replace the longer bracket (for PC usage) on your network interface card with the shorter bracket (for RackStation usage). --------- For more information about supported 10G/E or Gigabit network interface cards, visit www.synology.com. 11 Chapter 2: Hardware Setup... - Page 12 To replace the long bracket with the short one: 1 Remove the two screws holding the longer bracket to the interface card. Then remove the bracket as indicated below. 2 Replace the longer bracket with the shorter one from your RackStation. Then tighten the two screws to secure the shorter bracket.
-
Page 13: Replace A Malfunctioning Fan
Replace a Malfunctioning Fan Your Synology RackStation comes equipped with multiple cooling fans. In the event of a fan malfunction, your RackStation will emit a beeping sound. This section will guide you through the steps necessary to replace a malfunctioning fan. - Page 14 4 Remove the malfunctioning fan from the fan casing. 5 Slide a new fan into the casing. 6 Apply firm pressure and slide the power cord onto the power port. 7 Slide the new cooling fan unit into your RackStation. Make sure the power port is aligned properly. 14 Chapter 2: Hardware Setup...
-
Page 15: Start Up Your Rackstation
Start Up Your RackStation 1 Connect one end of the power cord to the power port located on the back of your RackStation and the other end to a power outlet. Make sure the Power Supply On/Off Switch is turned on ("|"). Note: Your RackStation comes equipped with a redundant power supply system, allowing two power cords to be connected. -
Page 16: Lcm Display
LCM Display The LCM display located on the front panel of your RackStation shows network information, displays event alerts in case hardware or system malfunctions occur, and offers basic controls. Menus can be navigated by pressing the Escape/Up/Down/Enter buttons. Under normal circumstance, the LCM display will show the hostname and IP address of your RackStation, as illustrated below: Event Display In the event your RackStation detects missing or malfunctioning hardware, the LCM display will show an event... -
Page 17: Chapter 3: Install Dsm On Rackstation
. Follow the onscreen instructions to complete the setup process. 2 Synology Assistant will be installed and launched on your computer. It will search and find your RackStation within the LAN. The status of your RackStation should be Not installed . - Page 18 4 Follow the onscreen instructions to complete the setup process. After the installation process is finished, you will be able to manage your RackStation with Synology DiskStation Manager (DSM). For more information about managing your RackStation with DSM, refer to Synology DiskStation User’s Guide available at...
-
Page 19: Install From Mac Os X
Install from Mac OS X 1 Insert the installation disc into your computer. Then double-click the SynologyInstall icon on the desktop. 2 In the window that appears, double-click the MacOSX folder, and then double-click Synology Assistant- [number].dmg. 4.1-2636 3 Double-click the Synology Assistant.app in the window that appears. - Page 20 Synology, SynologyAssistant 2 Insert the installation disc into your computer, and then double-click the SynologyInstall icon on the desktop. 3 In the File Browser window that appears, double-click the Linux folder, and then double-click Synology Assistant-[number].tar.gz . 4.1-2636 4.1-2636 20 Chapter 3: Install DSM on RackStation...
-
Page 21: Learn More
Run in Terminal in the dialog box that appears. Install DSM on RackStation When you have activated Synology Assistant, follow steps 2 to 4 of the “Install from Windows” section to finish setup. Learn More Congratulations! Your RackStation is now set up. Refer to the User’s Guide in the installation disc for advanced settings and management. -
Page 22: Appendix A: Specifications
‧Basic ‧JBOD ‧RAID 0 ‧RAID 1 ‧RAID 5‧RAID 5 + Hot Spare‧RAID 6 ‧RAID 10 Supported RAID Type ‧ Synology Hybrid RAID (1-Disk Fault Tolerance, 2-Disk Fault Tolerance) ‧FCC Class A ‧CE Class A ‧BSMI Class A Agency Certifications HDD Hibernation... -
Page 23: Appendix B: Led Indication Table
RackStation System Power on the front panel is off (“0”) System fan is not working Blinking Over temperature Alert Orange System fan normal Temperature normal Note: Model specifications are subject to change without notice. Please refer to www.synology.com for the latest information. - Page 24 IMPORTANT–READ CAREFULLY: THIS END USER LICENSE AGREEMENT ("EULA") IS A LEGAL AGREEMENT BETWEEN YOU (EITHER AN INDIVIDUAL OR A SINGLE ENTITY) AND SYNOLOGY, INC. AND ITS AFFILIATES, INCLUDING SYNOLOGY AMERICAN CORP AND SYNOLOGY UK LTD., (COLLECTIVELY, "SYNOLOGY") FOR ANY SYNOLOGY SOFTWARE, TOGETHER WITH ANY OTHER ASSOCIATED FIRMWARE, MEDIA, PRINTED MATERIALS AND "ONLINE"...
- Page 25 Section 16. Termination. Without prejudice to any other threatened breach of any provision of this EULA relating to rights, Synology may terminate this EULA if you do not abide Synology's intellectual property rights. by the terms and conditions contained herein. In such event, you must cease use of the Software and destroy all copies of Section 20.
- Page 26 THIS LIMITED WARRANTY ("WARRANTY") APPLIES TO THE PRODUCTS (AS DEFINED BELOW) OF SYNOLOGY, INC. AND ITS AFFILIATES, INCLUDING SYNOLOGY AMERICA CORP AND SYNOLOGY UK LTD., (COLLECTIVELY, "SYNOLOGY"). YOU ACCEPT AND AGREE TO BE BOUND BY THE TERMS OF THIS WARRANTY BY OPENING THE PACKAGE CONTAINING AND/OR USING THE PRODUCT.
- Page 27 SUPPLIERS' LIABILITY ARISING OUT OF OR RELATING damaged; (d) has been used with items not provided by Synology other than the hardware or software for which the TO THE USE OR INABILITY TO USE THE PRODUCT, ANY ACCOMPANYING DOCUMENTATION OR SOFTWARE Product is designed;...
- Page 28 English or, if both parties so agree, in Mandarin Chinese. between Synology and Customer related to the subject matter The arbitration award shall be final and binding on the hereof. No amendment, modification or waiver of any of the parties and may be enforced in any court having jurisdiction.