Signal Search; Back Color; Wide Mode; Sxga Mode - Panasonic PT-FW430E Operating Instructions Manual

SIGNAL SEARCH

When the power is turned on, this function
automatically detects the terminal to which signals are
input and sets the projection settings.
1 ) Press ▲▼ to select [SIGNAL
SEARCH].
2 ) Press ◄► to switch [SIGNAL
SEARCH].
The setting changes as follows each time the
z
button is pressed.
ON
ON Enables automatic input detection.
OFF Disables automatic input detection.
Note
When the AUTO SETUP button on the remote control
z
is pressed and no projecting signal is input, SIGNAL
SEARCH is enabled.

BACK COLOR

Sets the color of the projection screen when no signal
is input.
1 ) Press ▲▼ to select [BACK COLOR].
2 ) Press ◄► to switch [BACK COLOR].
The setting changes as follows each time the
z
button is pressed.
BLUE
USER LOGO
The entire projection area appears
BLUE
blue.
The entire projection area appears
BLACK
black.
DEFAULT
The Panasonic logo is projected.
LOGO
The logo transferred by "Logo
USER LOGO
Transfer Software *
*1 : "Logo Transfer Software" is included on the
supplied CD-ROM.
This function is used when WXGA, WXGA+,
WXSGA+, or WUXGA signals are input.
1 )
2 )
OFF
This function is used when the projected image of
SXGA signal extends outside of the screen.
1 )
2 )
BLACK
DEFAULT LOGO
" is projected.
1
DISPLAY OPTION menu

WIDE MODE

Press ▲▼ to select [WIDE MODE].
Press ◄► to switch [WIDE MODE].
The setting changes as follows each time the
z
button is pressed.
AUTO OFF
AUTO Switches the setting automatically.
OFF When inputting 4:3 signals
ON When inputting wide signals

SXGA MODE

Press ▲▼ to select [SXGA MODE].
Press ◄► to switch [SXGA MODE].
The setting changes as follows each time the
z
button is pressed.
SXGA
SXGA Normal setting
Set this when the edge of the image
SXGA +
is cropped
ON
SXGA +
51
ENGLISH -