Start-Up Display - Panasonic PT-FW430E Operating Instructions Manual

Start-up display

Start-up display
The LANGUAGE and INITIAL SETTING menu will be displayed when the projector is turned on for the first time
after purchase, or after doing INITIALIZE ALL (
In other occasions, you can change the settings navigating MENU.
Note
When the projector is turned on for the first time, you may be required to adjust the zoom lever and focus lever (
z
in the front of the projector body to make the menu screen clearer.
For details, see "How to adjust the state of the image". (
LANGUAGE
J
Select the language to show on the screen.
( page 46)
Æ
1 ) Press ▲▼◄► to select the desired
language.
INITIAL SETTING
PLEASE SELECT LANGUAGE.
SELECT
2 ) Press the <ENTER> button, to proceed
to INITIAL SETTING.
INITIAL SETTING
J
Select the item from the menus of [PROJECTION
METHOD], [SCREEN FORMAT], [SCREEN
POSITION], AND [HIGH ALTITUDE MODE].
1 ) Press ▲▼ to select the desired menu.
2 ) Press ◄► to change the settings in
the menu.
INITIAL SETTING
INSTALLATION
SCREEN FORMAT
SCREEN POSITION
HIGH ALTITUDE MODE
SWITCH TO HIGH ALTITUDE MODE "ON" IF OVER 1400m(4593Ft).
SELECT
(screen for PT-FW430E)
14
- ENGLISH
page 61). Set them in accordance with circumstances.
Æ
ENTER
FRONT/DESK
16 ： 10
OFF
RETURN
ENTER
Æ page 29)
PROJECTION METHOD (
z
FRONT/
DESK
FRONT/
CEILING
REAR/
DESK
REAR/
CEILING
SCREEN FORMAT (
z
[PT-FW430E only]
16:10
16:9
SCREEN POSITION (
z
[PT-FW430E only]
: Selectable only when [SCREEN FORMAT] is
½
[16:9].
LOW
CENTER
HIGH
HIGH ALTITUDE MODE (
z
When operating at low altitude
OFF (less than 1400 m (4593 ft) above
sea level)
When operating at high altitude
ON (between 1400 m (4593 ft)and
2700 m (8858 ft) above sea level)
3 ) Press <ENTER> to complete the
setting.
Note
If you press [RETURN] in the [INITIAL SETTING] menu,
z
you can go back to the [LANGUAGE] menu.
Æ
page 55)
Æ
Setting on a desk or other in
front of the screen
Mounting on the ceiling using the
ceiling mount bracket (option) in
front of the screen
Setting on a desk or other behind
the screen (using translucent
screen)
Mounting on the ceiling using
the ceiling mount bracket
(option) behind the screen (using
translucent screen)
page 49)
Æ
When projecting on a 16:10 or 4:3
screen
When projecting on a 16:9 screen
page 49)
Æ
Displays the menu in the lower
part of the screen.
Displays the menu in the
middle of the screen.
Displays the menu in the upper
part of the screen.
page 55)
Æ
page 29)