Switches And Sensors - Kyocera FS-1100 Service Manual

(2) Switches and sensors

Simplex model
10
9
7
1
Duplex model
10
9
7
1
1. Power switch................................................ Turns ON/OFF the AC power source.
2. Interlock switch ............................................ Shuts off 24 V DC power line when the top cover is opened.
3. Cassette switch............................................ Detects open/close cassette.
4. Registration sensor ...................................... Detects the timing of primary paper feed.
5. Paper sensor................................................ Detects the presence of paper in the cassette.
6. MP paper sensor (duplex model only) ......... Detects the presence of paper on the MP tray.
7. Exit sensor ................................................... Detects paper jam in the fuser or duplex conveying section.
8. Toner sensor ................................................ Detects the quantity of toner in a toner container.
9. Fuser thermistor........................................... Measures the heat roller temperature.
10. Fuser thermal cutout .................................... Shuts off the power source to the fuser heater lamp when the heat roller
4
3
4
3
Figure 2-2-2 Switches and sensors
reaches extremely high temperature.
8
5
2
6
8
5
2
2H5/2HS
Machine left
Machine inside
Machine right
Machine left
Machine inside
Machine right
2-2-3