Table of Contents
Advertisement
Using the Basic Functions
pausiNG aNd rEWiNdiNG liVE tV
If [Settings] > [Library/Media] > [Instant Recording] is
turned on, the STB automatically temporarily saves the
TV channel being watched or the radio channel being
listened to, starting 5 seconds after last channel change.
This time shifting mode makes it possible to stop live
mode, rewind and review the program that was recorded
the moment before.
If [Instant Recording] is turned off, you can start this
time shift mode manually by pressing either the p or (
button while watching live TV or listening to live radio.
• Press the p button to freeze the live program.
Press the p button again to resume the paused
program.
Press the ( button to rewind the recorded program.
Press the ) button to fast-forward the recorded
program.
\ Fast-forward functionality may be blocked or its speed may be limited by the content provider's
request. In such case proper info banner will appear.
• To go back to the live program, press the @ button.
• You can increase the rewind/fast-forward speed by pressing the ( or ) button again.
• You can use the ◀ or ▶ button to jump backwards or forwards.
When this mode is on, pressing INFO button shows the channel information. Current program progress bar
marks the recorded and seen content with blue while recorded. The unseen part of the content is shown in
green.
• You can watch recorded program by selecting it with ◀ and ▶ buttons from within channel information and
pressing OK button.
• Press the REC button to store recorded program in the [Library].
Watching the stored recording from the [Library] will not stop this recording. This recording will be lost
immediately after it is stopped.
The maximum temporary recording length is 2 hours.
\ Before using this function you must connect an external USB storage device to the USB port on the
STB.
Pausing and rewinding live TV
51
Advertisement
Table of Contents
