Table of Contents
Advertisement
About the product
FroNt paNEl
This section describes the button and LEDs at the front panel.
REMOTE CONTROL SENSOR
\ Status LED : Glows green when the STB is on active mode.
Glows red when the STB is on standby mode. If the LED is not glowing, press the Power button on
your remote control to turn your product on.
rEar paNEl
This section describes the names and functions of the ports on the rear panel.
1 Smart Card Slot
To insert the Smart Card.
1
To connect the Satellite antenna cable from your cable system.
2
A digital audio output port, which is connected to an audio system with an OPTICAL OUT port with an
3
optical cable.
To connect to TV with an HDMI cable.
4
LAN connection to router for interactive functionality.
5
To connect a TV with a SCART gender cable.
6
To connect external power adaptor.
7
Front Panel
Channel button
Status LED
2 ANT IN
4 HDMI OUT
3 OPTICAL OUT
USB port
POWER button
7 DC POWER
5 LAN
6 EXT (TV)
09
Advertisement
Table of Contents
