Table of Contents
Advertisement
Auto Power Off Timer
If you want the power to automatically turn off if there is no incoming source for a
certain amount of time, use the
select between 1-60 seconds.
Standby Mode
This mode allows you to choose between a low power setting, which saves energy, or
a "fast startup" mode that keeps the AC power supplies running. Below each option is
described and why you might want to select it.
• Low Power - Powers off every component and board possible, which helps
conserve energy. In standby mode, the low power option only uses 0.5W of
power.
• Fast Startup - Keeps AC power supplies running takes a little less time to power
up and it is also needed if you intend to continually use networking capabilities.
Planar UltraRes User Manual
AUTO POWER OFF TIMER
Auto Power Off Timer
slider on the Settings tab and
45
Advertisement
Table of Contents
