Table of Contents
Advertisement
Line up the middle hole of the top wall mount with the screw hole drilled from
8
the template.
Note:
This picture shows mounts for a landscape installation.
Tighten the screw into the mount.
9
Use a level to make sure the mount is level.
10
Then install additional screws as needed.
11
Note:
Screws installed near the hooks provide the best support.
Install the center screw in the bottom mount and repeat steps
12
additional screws that you want to install. Note that there are open mount
channels on the brackets. So you can install the screws wherever necessary along
those channels.
Planar UltraRes User Manual
Installing an UltraRes Display on a Wall
-
for any
10
11
25
Advertisement
Table of Contents
