Panasonic WJ-ND300 Installation Manual page 19

G Connection for emergency recording
When the external switch is turned ON, emergency recording will be started.
Recording time and recording rate for emergency recording differ according to the settings of "Emergency REC" of
"Recording" on the SETUP MENU. (Refer to the Setup Instructions (PDF).)
G Connection for external recording changeover
When the external switch is turned ON, the recording program changeover is affected for recording.
The recording program can be set by selecting "EXT" for "Time Table" of "Schedule" on the SETUP MENU. (Refer to the Setup
Instructions (PDF).)
G Connection for the Auto Adjust Time function
• When "Auto Adjust Time" of "System" on the SETUP MENU is set to "MASTER"
"Time Adjust Output" becomes available and the clock of this unit can be applied to other units.
!3
ALARM/CONTROL
(Earth)
(Emergency record input)
!3
!2
ALARM/CONTROL
(Earth)
(External recording mode)
!3
@4
ALARM/CONTROL
(Earth)
(Time adjust output)
@0
External switch
External switch
Terminal block of other units
Front LED
monitor
output
19