Using A Printer With An Sd Memory Card Slot - Panasonic DMC-FS42 Operating Instructions Manual

[PAGE LAYOUT] (Layouts for printing that can be set with this unit)
Item
[h]
[3]
[4]
[5]
[6]
• An item cannot be selected if the printer does not support the page layout.
Layout printing

When printing a picture several times on 1 sheet of paper
For example, if you want to print the same picture 4 times on 1 sheet of paper, set [PAGE
LAYOUT] to [6] and then set [NUM. OF PRINTS] to 4 for the picture that you want to
print.
When printing different pictures on 1 sheet of paper
For example, if you want to print 4 different pictures on 1 sheet of paper, set [PAGE
LAYOUT] to [6] and then set [NUM. OF PRINTS] to 1 for each of the 4 pictures.
Note
• The camera is receiving an error message from the printer when the [*] indication lights
orange during printing. After finishing printing, make sure there are no problems with the
printer.
• If the number of prints is high, the pictures may be printed several times. In this case,
the remaining number of prints indicated may differ from the number set.

Using a printer with an SD Memory Card slot

Attach the SD card according to the operating instructions of printer.
• You cannot use SDHC cards if the printer does not support SDHC cards.
Connecting to other equipment
Settings on the printer are prioritized.
1 page with no frame print
1 page with frame print
2 pages print on 1 page
4 pages print on 1 page
- 10 -
Description of settings