Print Settings - Panasonic DMC-FS42 Operating Instructions Manual

Select and set the items on the screen in step 2 of the "Selecting a
single picture and printing it" or in step 3 of the "Selecting multiple
pictures and printing them".
• When you want to print pictures in a paper size or a layout which
is not supported by the camera, set [PAPER SIZE] and [PAGE
LAYOUT] to [h] and then set the paper size or the layout on the
printer. (For details, refer to the operating instructions of the printer.)
• When [PRINT SET (DPOF)] has been selected, the [PRINT WITH DATE] and [NUM. OF
PRINTS] items are not displayed.
Item
[OFF]
[ON]
• If the printer does not support date printing, the date cannot be printed on the picture.
• Since the printer's settings may take precedence over the print with date setting, check
the printer's print with date setting as well.
• When you print pictures stamped with text, set [PRINT WITH DATE] to [OFF] since the
date will be printed over the stamped text if you specify printing of the date.
Note
When asking the photo shop to print the pictures
• By stamping the date using [TEXT STAMP] (P87) or setting date printing at the time of
the [PRINT SET] (P92) before going to a photo shop, the dates can be printed at the
photo shop.
You can set the number of prints up to 999.
Connecting to other equipment

Print Settings

[PRINT WITH DATE]
Date is not printed.
Date is printed.
[NUM. OF PRINTS]
- 10 -
Description of settings
MULTI SELECT
PRINT START
PRINT WITH DATE
OFF
NUM.OF PRINTS
1
PAPER SIZE
PAGE LAYOUT
CANCEL SELECT EXIT