Sony NEX-FS100U Operating Manual page 80

Press the MENU button t select
GPS SETTING
See page 43.
GPS INFORMATION
The camcorder displays the triangulating
information.
Satellite icons
Triangulating
gauge
How to check the triangulating
information
Color of the
satellites/
triangulating
gauge
z/x (black)
z/x (gray)
z/x (brown)
z/x (ocher)
z/x (green)
80
Information for the
location that was
previously obtained.
Status
No signal, but orbit
information for the satellite
is available.
33% of the satellite orbit
information has been
obtained.
66% of the satellite orbit
information has been
obtained.
99% of the satellite orbit
information has been
obtained.
Triangulating is completed
and the satellite is currently
being used.
(OTHERS) with the SEL/PUSH EXEC dial.
If data on your current location cannot
be obtained
When you cannot obtain your current
location, a display that allows you to
triangulate the location again appears.
In this case, follow the instructions that
appears on the LCD screen.
To obtain your current location
manually
Touch [Update] to triangulate the location.
To close the triangulating information
screen
Touch
AUTO CLOCK ADJ
The camcorder can maintain accurate time
automatically by acquiring time
information from the GPS system.
B ON
Maintains accurate time automatically.
OFF
Does not maintain accurate time using the
GPS system.
b Notes
• You must set the date and time on your
camcorder before using your camcorder (p. 21).
• There may be discrepancies of a few seconds
even if [AUTO CLOCK ADJ] is activated.
• This function automatically adjusts the clock
when the camcorder receives GPS signals and
finishes triangulating successfully while the
power is on. Once the clock is adjusted, it will
not be adjusted until the next time you turn the
camcorder on again.
• The clock may not be adjusted to the correct
time automatically using the GPS system,
depending on the country/region selected for
your camcorder. In this case, set [AUTO
CLOCK ADJ] to [OFF].
.