Sony NEX-FS100U Operating Manual page 68

Menu items (Continued)
LCD BRIGHT
DISPLAY OUTPUT
(TC/UB SET) menu
TC PRESET
UB PRESET
TC FORMAT
TC RUN
TC MAKE
UB TIME REC
(OTHERS) menu
ASSIGN BUTTON
CLOCK SET
AREA SET
DST SET/
SUMMERTIME
LANGUAGE
GPS SETTING
GPS INFORMATION
AUTO CLOCK ADJ
AUTO AREA ADJ
DATE REC
BEEP
REC LAMP[F]
REC LAMP[R]
REMOTE CONTROL
MEDIA FORMAT
REPAIR IMAGE DB
FILE
USB CONNECT
OPERATION TIME
68
Adjusts the brightness of the LCD screen.
Selects where to output the display information.
(p. 78)
Sets the time code.
Sets the user bits.
Selects the frame mode.
Selects how the time code advances.
Selects how the time code is recorded on the
recording media.
Saves the actual time in the user bits.
(p. 79)
Assigns functions to the ASSIGN buttons.
Sets the date and time.
Sets the area you use the camcorder.
Set the summertime.
Sets the language of the on-screen display.
Sets the GPS.
Displays the triangulating information.
Maintains accurate time automatically by
acquiring time information from the GPS
system.
Compensates for time differences automatically
by acquiring location information from the GPS
system.
Superimposes the date and time on images.
Sounds the operation melody.
Turns off the front recording lamp.
Turns off the rear recording lamp.
Disables the supplied Wireless Remote
Commander.
Formats the recording media.
Checks the database information and the
consistency of movies and still images on the
recording media, and repairs if any
inconsistencies found.
Used when [USB CONNECT] does not appear
on the screen by connecting the camcorder to
another device with the USB cable.
Displays the total hours of operation.