LG F1260RD Owner's Manual page 21

H ow to use the washer
Intensive
• If the laundry is heavily soiled "Intensive"
option is effective.
• By selecting the Intensive option, the wash
time may be extended, depending on the
program selected.
• To use this option press the Intensive button
once before the wash program is started.
Tub Clean
Tub Clean course can be set by
pressing 'Tub Clean' button.
TUB CLEAN is special cycle to
clean the inside of the washer.
This cycle uses higher water
level with higher spin speed. Perform this
cycle regularly.
How to use the Tub Clean cycle:
1. Remove any clothing or items from the
washer and close the door.
2. Open the dispenser drawer and add Anti
limescale (Calgon) to the Main wash
compartment.
NOTE: Do not add any detergent to the
detergent compartments. Excessive suds
may generate and leak from the washer.
3. Close the dispenser drawer slowly.
4. Power On and then press 'Tub Clean'
5. Press the Start/Pause button to start.
6. After the cycle is complete, leave the door
open to dry around the washer door
opening, flexible gasket and door glass.
! CAUTION
If there is a small child, be careful not to
leave the door open for too long.
Time Delay
Preparing washing before starting "Time Delay"
- Turn on the water tap.
- Load laundry and close the door.
- Place the detergent and fabric softener in
the drawer.
• How to set "Time Delay"
- Press Power button.
- Turn the Program dial to select
the program you require.
- Press Time Delay button and set the
desired time.
- Press the Start/Pause button.
• If Time Delay button is pressed, "3:00" is
displayed. The maximum delayed time is
19:00 hours and the minimum time is 3:00
hours.
• Each pressing of the button advances time
delay by one hour.
• To cancel the time delay, press the
Power button.
• Time Delay is 'expected time' from the
present to the completion of washing cycle
or selected process (Wash, Rinse, Spin).
• According to the condition of water supply and
temperature, the delayed time and the actual
washing time may vary.
21