H
ow to use the washer
Start/Pause
1. Start
• This Start/Pause button is used to start
wash cycle or pause the wash cycle.
2. Pause
• If temporary stop of wash cycle is needed,
press "Start/Pause" button.
• When in Pause, the power is turned off
automatically after 4 minutes.
• NB. The door will not open before 1 to 2
minutes when Pause is selected,
or at the end of the wash cycle.
Door Lock
• Lights whenever the door of the washer is
locked.
• The door can be unlocked by pressing the
Start/Pause button to stop the washer.
• The door can be opened after a short delay.
Detecting
• While the "Detecting" is shown in the display
the machine rotates slowly and detects how
many laundries are loaded in the drum.
It will take a few seconds.
18
Option
• By pressing the option
button, only one option
functions may be selected.
1. Pre Wash
• Use this option for loads that need
pretreatment. This adds 16 minutes of pre
washing before draining.
- When using Pre Wash option, do not use a
liquid detergent for the main wash.
Use powder for the main wash.
2. Rinse+Spin
• Use this option to rinse and then spin.
3. Dry Only
• When you want dry only, select the this
option.
4. Bio
• If you want to eliminate protein stains(milk,
blood, chocolate...), you may select Bio
function by pressing the option button.
• NB. You can select Bio function when
temperature is higher than 60°C in
Cotton, Cotton Quick, Synthetic,
Wash + Dry (5kg/5kg) and Baby Care.
5. Soak
• Use this mode to wash normal clothes or
thick and heavy clothes which are
excessively dirty.
The required lamp will light up for
identification.