Technical Specifications - Windsor QSC20 Operating Instructions Manual

TECHNICAL SPECIFICATIONS

ITEM
Nominal power – non-traction model
Nominal power – traction model
Rated Voltage
Rated Amperage – non-traction model
Rated Amperage – traction model
Batteries
Scrub Brush Motor
Vacuum Motor
Propelling Motor – traction model
Mass (GVW) – non-traction model
Mass (GVW) – traction model
Weight empty without batteries – non-traction model
Weight empty without batteries – traction model
Solution Control – non-traction model
Solution Control – traction model
Solution tank capacity
Recovery tank capacity
Scrub brush diameter
Scrub brush pressure – non-traction model
Scrub brush pressure – traction model
Scrub brush speed
Tires – non-traction model
Tires – traction model
Casters
Foundation Pressure – non-traction model
Foundation Pressure – traction model
Maximum Speed – traction model
Coverage
Frame Construction
Minimum aisle u-turn width
Maximum rated climb and descent angle with empty tanks
Maximum rated climb and descent angle with full tanks
3-1
SABER (QSC) 980067 11/13/02
DIMENSION/CAPACITY
1100 W
1200 W
24VDC
45 Amps
50 Amps
2 x 12 Volt 105-130-195 AH @
20hr rate
.75 hp (0.56 kW)
.75 hp (0.56 Kw)
.38 hp (0.28 Kw)
543 lbs. (246.5 kg)
556 lbs. (252.4 kg)
213 lbs. (96.1 kg)
232 lbs. (105.3 kg)
Gravity feed, fully variable
Gravity feed, fully variable with
automatic shut-off in neutral
13 gal. (50 l)
16 gal. (60 l)
20 in (51 cm)
50 lbs. (23 kg)
100 lbs. (45 kg)
200 rpm
2 x 8 in (20 cm) thermoplastic
elastomer non-marking
2 x 8 in (20 cm) foam filled non-
marking
3.5 x 1.25 in (9 cm) polyurethane
solid non-marking
2
105 lbs./in ( 725 kPa)
2
46 lbs./in ( 315 kPa)
2.75 miles/hour (4.5 km/hour)
2
9500 ft /hour at 2 mph with
2 in. overlap
Steel with epoxy powdercoat
finish.
45 in. ( 114.3 cm)
2%
2%