Using The Magnify Feature; Freezing The Screen - ViewSonic pj650 User Manual

Hide thumbs Also See for pj650:

Table of Contents

Using the Magnify Feature

1 Press the MAGNIFY (ON) button

The projector enters MAGNIFY mode.

2 Press the POSITION button, then use the

select the area to enlarge and then press the POSITION button again to confirm

your selection.

3 Press the

Press the MAGNIFY (OFF) button to exit MAGNIFY mode and restore the screen to normal. (The

projector will also automatically exit MAGNIFY mode if there is a change in the input signal's state.)

NOTE:

The projector will automatically exit from MAGNIFY mode if either the INPUT SELECT, AUTO, ASPECT

or VIDEO feature is used, or if there is a change in the input signal's state.

1 Press the FREEZE button

The icon appears and the screen will freeze at the current image. Press the FREEZE button again and the

appears as the projector exits FREEZE MODE.

NOTE:

•

The projector will automatically exit FREEZE mode if either the POSITION, VOLUME, MUTE, AUTO,

BLANK ON/OFF, or MENU ON/OFF feature is used, or if there is a change in the input signal's state.

•

If the projector continues projecting the same image for a long time (i.e. you forget to exit FREEZE

T H E T R U S T E D S O U R C E F O R P R O J E C T O R L A M P S A N D A C C E S S O R I E S

mode), the image might possibly remain as an afterimage. Do not leave the projector in FREEZE mode for

too long.

buttons to zoom in and out of the selected area.

buttons to

ViewSonic PJ650/PJ520

Table of Contents

Pj520