Connecting Your Devices; Plug & Play - ViewSonic pj650 User Manual

Hide thumbs Also See for pj650:
Table of Contents

Advertisement

Connecting your devices

Devices You Can Connect to the Projector (Refer to this section for planning your device configuration
to use for your presentation.)
CAUTION
Incorrect connecting could result in fire or electrical shock. Please read this manual and the separate
"PJ650 / PJ520 Quick START GUIDE".
ATTENTION Precautions to observe when connecting other devices to the projector
Whenever attempting to connect other devices to the projector, please thoroughly read the manual of each
device to be connected.
TURN OFF ALL DEVICES prior to connecting them to the projector. Attempting to connect a live device
to the projector may generate extremely loud noises or other abnormalities that may result in malfunction
and/or damage to the device and/or projector. Refer to the "TECHNICAL" of the PJ650 / PJ520 User Guide
for the pin assignment of connectors and RS-232C communication data.
Make sure that you connect devices to the correct port. Incorrect connection may result in mal-function
and/or damage to the device and/or projector.
A component cable and some other cables have to be used with core set. Use the accessory cable or a
designated type cable for the connection. For cables that have a core only at one end, connect the core to
the projector.
Secure the screws on the connectors and tighten.
DVD players
VCRs
NOTE:
When connecting the projector to a notebook computer, set it so as to activate the RGB external image output
(setting it to CRT display or to simultaneous LCD and CRT display). For more information, refer to the
instruction manual of the notebook computer.
Plug & Play
This projector is compatible with VESA DDC 1/2B. Plug & Play is possible by connecting to a computer that
is compatible with VESA DDC (Display Data Channel).
Use this function by connecting the accessory RGB cable with RGB IN 1 terminal (DDC 1/2B compatible).
Plug & Play may not operate by any other connection.
NOTE:
Plug & Play is a system configured with peripheral equipment which includes a computer, display and an
T H E T R U S T E D S O U R C E F O R P R O J E C T O R L A M P S A N D A C C E S S O R I E S
operating system.
This projector is recognized as a Plug & Play monitor. Load the driver contained in the CD Wizard
included with the unit.
Display monitors
Laptop computers
Desktop computers
ViewSonic PJ650/PJ520
10

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pj520

Table of Contents