Ports And Cables - ViewSonic pj650 User Manual

Ports and Cables

Refer to this table to determine which projector port and cable to use for connecting to a given device. Use
this table for determining which cables to prepare.
Function
RGB input
RGB output
USB mouse control
PS/2 mouse control
ADB mouse control
Serial mouse control
RS-232C communication
S-video input
Video input
Component video input
Audio input
NOTE:
About Plug-and-Play Capability
• This projector is compatible with VESA DDC 1/2B. Plug-and-Play can be achieved by connecting this
projector to computers that are VESA DDC (display data channel) compatible. Please take advantage of
this function by connecting the accessory RGB cable to the RGB IN 1 port (DDC 1/2B compatible). Plug-
and-Play may not work properly if any other type of connection is attempted.
• Plug-and-Play is a system composed of the computer, its operating system and peripheral equipment (i.e.
display devices).
• Please use the standard drivers as this projector is a Plug-and-Play monitor.
• Plug-and-Play may not function properly with some type of computers. Use the RGB IN 2 port if Plug-
and-Play does not function correctly.
T H E T R U S T E D S O U R C E F O R P R O J E C T O R L A M P S A N D A C C E S S O R I E S
Projector Port
RGB IN 1
RGB IN 2
RGB OUT
USB
CONTROL
S-VIDEO IN
VIDEO IN
COMPONENT VIDEO Y
COMPONENT VIDEO C
COMPONENT VIDEO C
AUDIO IN L
AUDIO IN R
Connection Cables
Accessory RGB cable or optional RGB
cable with D-sub 15-pin shrink jack and
inch thread screws
Accessory USB cable
Optional PS/2 mouse cable
Optional ADB mouse cable
Optional serial mouse cable
Optional RS-232C cable
Optional S-video cable with mini DIN 4- pin
jack
Accessory audio/video cable
/P
Optional component video cable
B B
/P
R R
Accessory audio/video cable or optional
audio cable with RCA jack
ViewSonic PJ650/PJ520 8