Table of Contents
Advertisement
PICTURE
SOUND
TUNING TIMER
CLOCK
- -:- - AM
ON CH
- - -
ON TIMER
- - : - - AM
OFF TIMER
- - : - - AM
DISPLAY
OFF
ALARM
OFF
PICTURE
SOUND
TUNING TIMER
BLUE BACK
ON
CH NO.
1
SWAP TO
- - -
SWAP NOW
LANGUAGE
ENGLISH
BASIC OPERATION
4) TIMER MENU
INSTALL
Press menu key to display main menu. Then select the
timer submenu by VOL+/VOL- or
CH+/CH- or
User can select any parameter in timer menu by pressing
CH+/CH- or
VOL+/VOL- or
CLOCK : You can set time by using 0 to 9 digit keys & can
change AM/PM using VOL+/VOL- or
Clock is stored in standby condition but gets reset after
mains AC power OFF.
ON CH : This function is used to switch the set using
ON TIMER to the required program number.
ON TIMER & OFF TIMER
You can set ON/OFF timer by using 0 to 9 keys. Your TV
set will switch ON/OFF automatically at the time you
select.
DISPLAY : Clock display will appear continuously on the
screen by making display ON & it will disappear by
making Display off.
ALARM : In alarm ON, during OFF timer, GOOD
BYE message is displayed before the set goes to standby.
NOTE- All other options in Timer menu remains
deactivated until we enter clock time.
5) INSTALL MENU :
INSTALL
Press menu key to display main menu. Then select the
Install submenu by VOL+/VOL- or
CH+/CH- or
User can select any parameter in Install menu by
pressing CH+/CH- or
setting by VOL+/VOL- or
BLUE BACK :
When Blueback is ON and when there is no signal
transmission in TV/ AV mode , the screen is set to a
pleasant blue colour. For watching TV in case of weak
signal reception, you can turn OFF the blueback.
Set switches OFF automatically if the blueback is
present for more than 10 minutes ( approx.).
CHANNEL NO : It displays the current channel being
viewed.
SWAP TO : In SWAP TO, set program number which is
to be swapped
keys from remote handset.
SWAP NOW: Select SWAP NOW to swap the
two programs.
LANGUAGE : You can select ENGLISH, HINDI,
MARATHI and GUJRATI language, which will be used
for displaying menus and indications in selected
language.
11
/
key and press
/
key to enter into it.
/
key and adjust it to desired setting by
/
key.
/
key.
/
key and press
/
key to enter into it.
/
key and adjust it to desired
/
key.
with current program by using 0 to 9
Advertisement
Table of Contents
