TANDBERG 770 MXP User Manual page 102

Tandberg video conferencing user manual
Hide thumbs Also See for 770 MXP:
Table of Contents

Advertisement

TANDBERG 770_880_990MXP User Manual
Diffserv Video
Used to define which priority Audio, Video, Data and Signaling packets should have in an IP
network. The priority ranges from 0 to 63 for each type of packets.
Diffserv Telephony
Used to define which priority Audio packets should have in an IP network for telephone calls.
The priority ranges from 0 to 63 for each type of packets.
H.323 Ports
Static
When selecting static H.323 ports for TCP connections the ports 5555 or
5556 will be used for Q.931 and H.245 respectively.
Dynamic
The system will allocate which ports to use when opening a TCP connection.
The reason for doing this is to avoid using the same ports for subsequent
calls as some firewall consider this as a sign of attack.
4.8.2.3 SNMP Settings
SNMP Settings
SNMP Trap Host identifies the IP-address of the SNMP manager. SNMP (Simple Network
Management Protocol) is used for monitoring and configuring of different entities in a network.
The system's SNMP Agent responds to requests from SNMP Managers (a PC program etc.).
SNMP traps are generated by the agent to inform the manager about important events.
Traps can be sent to multiple SNMP Trap Hosts. Enter the IP address of up to three SNMP
managers. All traps will then be sent to the hosts listed.
SNMP Community names are used to authenticate SNMP requests. SNMP requests must
have a 'password' in order to receive a response from the SNMP agent in the codec. Note
that the SNMP Community name is case sensitive. The default password is "public".
4.8.2.4 Wireless LAN Settings
(only TANDBERG 770/880/990 MXP)
SSID (Service Set Identification)
Example "WLANNETWORK". Defines a local network id for this wireless region. It must be
the same for all end points and the access point. An endpoint will find the access point if the
SSID is correct, however if the encryption key is faulty it will not transmit any data.
Community (optional)
Community can be used when connecting to an access point where the SSID is the same.
Example "Unit2".
98

Advertisement

Table of Contents
loading

This manual is also suitable for:

880 mxp990 mxp

Table of Contents