KTM 990 Super Duke 2008 Owner's Manual page 86

TECHNICAL SPECIFICATIONS – ENGINE
ENGINE
Ignition system
Ignition timing
Map-controlled via TPS
Spark plug
Electrode distance
Cooling system
Cooling liquid
Starting aid
JASO T903 MA
TEMPERATUR
0°C
32°F
5W/40
Engine oil
Only use fully synthetic engine oils that meet the JASO
MA quality requirements (see information on the can).
KTM recommends Motorex Power Synt 4T in the 10W/50
viscosity (for temperatures over 0°C, 32°F) or 5W/40
(for temperatures under 0°C, 32°F).
990 SUPER DUKE 2008
breakerless transistorized electronic ignition system with digital ignition advance
Map-controlled via TPS
12V 450W at 6000 rpm
NGK IR KR8DI
0.8 mm
liquid cooled, permanent circulation of cooling liquid through water pump
2.1 liters (0.55 USgal), 50% antifreeze, 50% distilled water, at least –25° C
electric starter
#
10W/50
»
990 SUPER DUKE R 2008
NGK LKAR8AI-9
* PON / CLC
87
91 Premium
PON = Pump Octane Number
CLC = Cost of Living Council
RON = Research Octane Number
ROZ = Research Oktan Zahl
MON = Motor Octane Number
RON / ROZ MON
91 83
95 87
85