KTM 990 Super Duke 2008 Owner's Manual page 48

»
MAINTENANCE WORK ON CHASSIS AND ENGINE
47
Changing the seat height (Super Duke R)
The seat height of the mono-seat can be raised by 7 or 15 mm (0.3 or 0.6 in). The parts
required are supplied with the bike.
Remove the seat and the screws [B]. Fit 4 spacers [A] at the same height front and back
between the seat [1] and the seat carrier [2] and insert screws with the appropriate length.
No spacers . . . . . . . . . . . . . . . . . . . M6x16 screws
7 mm (0.3 in) spacers . . . . . . . . . . . M6x20 screws
15 mm (0.6 in) spacers . . . . . . . . . . M6x30 screws
Tighten the screws to 10 Nm.