Table of Contents
Advertisement
7
Setting Up NetWare 5.x/ 6 Novell Distributed Print Service (NDPS)
Note
Before specifying the NDPS settings, create the NDPS Broker and
NDPS Manager and check that they are loaded.
Check that the NetWare server is set to use the TCP/IP protocol.
Specify the IP address for the controller and check that it has started.
Creating an NDPS Printer Agent
1
Log in with administrator privileges.
2
Start up NWadmin.
3
Right-click the name of the organization or department container
where you want to create the Printer Agent, and then select
Printer.
4
In the
5
In the
and then click [Create].
6
Check the printer agent name, and then browse for the NDPS
Manager in the
7
Under Gateway Types, select
8
On the Novell DPS Settings window, select
Novell Port Handler
9
On the Connection Type window, select
10
Input the IP address assigned to the control as the host address and
"Print" for the printer name, and then click [Finish].
11
On the printer driver registration screen that appears, select
each operating system, and then finalize the registration.
Note
For information about configuring settings for printer user privileges,
printer alert options, and queue allocation, refer to the NetWare
documentation.
7-12
NDPS Printer Name
Printer Agent Source
NDPS Manager Name
for the port handler.
Connecting the Computer and Copier
field, input the printer name.
field, select
Create New Printer
field.
Novell Printer
Gateway.
((None))
Remote Printer
NDPS
Agent,
for the printer and
LPR/TCPIP.
None
for
KN-419
Advertisement
Table of Contents
